AG真人国际

1、Equipment name: medical oxygen generator

2、Specifications and model: HDNZY-10L

3、Equipment brand: Wenzhou Haidoneng -WZHDN

Four.Product Description:

Oxygen generator is a kind of machine that makes oxygen. Its principle is to use air separation technology.First of all, the air is compressed with high density and then the condensing point of each component in the air is different to make it gas-liquid separation at a certain temperature, and then further distillation is obtained.

Five.Working principle:

The flow is two towers.Raw materials by air compressor pressurized, after a air pretreatment device to remove oil, dust and other solid impurities and water, and cool to room temperature, after processing, the compressed air from the inlet valve to a molecular sieve adsorption tower, such as nitrogen, carbon dioxide in the air by adsorption, the outflow of gas for high purity oxygen, namely when the adsorption tower after reaching a certain degree of saturation,The inlet valve is closed, the flushing valve is opened, the adsorption tower enters the flushing stage, after the flushing valve is closed, the desorption valve is opened to enter the desorption regeneration stage, so that a cycle is completed.

SIX. Matters needing attention:

1. When the oxygen generator is started, do not put the float ball of the flowmeter on the zero position;

2. It is forbidden to start the machine without installing the filter and strainer;

3. When the oxygen generator works, try to place it in the indoor clean position, and the distance from the wall or other objects around it is not less than 20 centimeters;

4. Oxygen generator should be placed smoothly, otherwise it will increase the noise of oxygen generator operation;

5, the use of oxygen generator to avoid open fire, to avoid fire;

6. The water level in the humidifying bottle should not be too high (the water level should be half of the bottle body), otherwise the water in the bottle is easy to escape or enter the oxygen tube;

7. When the patient uses the oxygen generator, in order to prevent any failure such as power failure, which affects the patient's use of oxygen and causes accidents, please prepare other emergency measures;

8. In the process of transportation and storage, it is strictly prohibited to place horizontally, upside down, wet or directly exposed to sunlight;

9. When the oxygen generator is not used for a long time, please cut off the power supply, pour out the water in the humidifying bottle, wipe the surface of the oxygen generator clean, cover it with plastic, and store it in a dry place without sunlight.

10. Cut off the power supply when cleaning the oxygen generator, filter, etc., or replacing the insurance;

11. Special attention should be paid to the oxygen bag filling by the oxygen generator. After the oxygen bag is filled, the oxygen bag must be unplugged first and then the oxygen generator switch should be closed.

◇ Metallurgical industry: electric arc furnace steelmaking, blast furnace iron making oxygen rich, shaft furnace oxygen rich combustion;

◇ Non-ferrous metal smelting industry: lead smelting, copper smelting, zinc smelting, aluminum smelting, all kinds of furnace oxygen rich;

◇ Environmental protection industry: drinking water treatment, wastewater treatment, pulp bleaching, sewage biochemical treatment;

◇ Chemical Industry: Various oxidation reactions, ozone production, coal gasification;

◇ Other industries: Fermentation, cutting, glass furnaces, glass blasting, air conditioning, waste incineration;

◇ Medical Industry: Oxygen Bar, Oxygen Therapy, Sports Health Care;

◇ Aquaculture: Marine and freshwater aquaculture.

VIII. Technical parameters:

I. Normal working conditions of the equipment:

1, ambient temperature: 5℃ ~ 40℃

2. Power supply voltage: 220V±22V air compressor, oxygen compressor 380V±38V

3, Power frequency: 50Hz±1Hz

4. Power: 37KW

5, relative humidity: ≤80%

6, atmospheric pressure: 86KPa ~ 106KPa

7, host size L×W×H (excluding air compressor) : 3.5m × 1.8m × 2.7m

II. Physical and chemical indexes of oxygen of the products made by the equipment:

1. Oxygen production 10m3/h

2, oxygen concentration: ≥ 90% (V/V)

3, moisture content: ≤0.07g/m3

4, carbon dioxide content: ≤0.01% (V/V)

5. Carbon monoxide content should be in line with YY/T0298

6. The content of gaseous acid and alkali should be in line with YY/T0298

7, ozone and other gaseous oxides content should conform to YY/T0298

8, solid material particle size: 10μm or less

9, solid substance content: ≤0.5mg/m3

1. The system equipment is entitled to a one-year free warranty. The warranty date starts from the date of product acceptance, and the consumable filter material is not included.

2. In case of equipment quality problems occurring during the warranty period (except caused by misoperation or unforeseeable factors), the Supplier shall maintain the equipment free of charge and replace the damaged parts.

3. After the expiration of the warranty period, only a certain material fee and appropriate technical service fee will be charged.

4. In case of system failure that cannot be solved by itself or cannot be solved by phones, our technical maintenance personnel will make solutions (including temporary measures) and schedule within 24 hours after receiving the written notice of failure from the Demander and report to the leaders of both parties.

5. After the delivery of the equipment, our company will have engineers to pay a return visit to understand the operation of the equipment and provide technical services in time.We welcome users to ask any technical questions, we will promptly reply.

(1) The user should provide the detailed information of raw water test, so that our company can carry out the relevant selection and arrangement calculation.

(2) The user should explain the water quality requirements, use and quantity of water produced.

(3) Our company has a variety of types of pressure vessels, membrane, accessories, etc. If the customer special instructions, we will try our best to meet the requirements.

(4) Our company provides the installation and debugging of the designed and sold equipment and the training of the user's operation and operation personnel.

(5) Our company implements the principle of one-year equipment warranty and lifetime service for users, and establishes files for tracking services to ensure the quality level.

If the above equipment fails to meet your requirements, please contact us, we will work out a detailed project plan according to your actual situation, to achieve low cost, high efficiency, scientific process combination, so that the water production to meet your ideal requirements.