AG真人国际

1、Equipment name: automatic hollow fiber ultrafiltration mineral water equipment

twoSpecifications and model: HDNUF-20000~30000L

3.Equipment brand: Wenzhou Haidoneng -WZHDN

Four.Product function description:

1, mechanical filter:

It is mainly used to remove impurities such as rust, sediment, algae and suspended matter in water, reduce the turbidity of water, so that the turbidity of effluent is less than 0.5NTU, CODMn is less than 1.5mg/L, iron content is less than 0.05mg/L, SDI≤5.Backwash and forward wash can be carried out at any time through the control valve to wash off the dirt on its surface, prevent its blockage and restore its filtering ability.

2, activated carbon filter:

Activated carbon has a strong adsorption filtration performance, the residual chlorine in the water, heterochromatic, odor, organic matter has a strong adsorption.Because the reverse osmosis membrane is very sensitive to residual chlorine and organic matter, it must be equipped with activated carbon to adsorb residual chlorine and organic matter, so that the residual chlorine in the effluent is less than or equal to 0.1mg/L and SDI is less than or equal to 4. First, it can meet the water supply requirements of the reverse osmosis membrane.The second can greatly improve the original taste of the source water.Can at any time through the multi-way control valve or steam butterfly valve backwash, in order to wash off the surface of the colloid and other pollutants, to prevent the surface of activated carbon is surrounded by impurities can not play adsorption, and to prevent its blocking, restore its processing ability.

3. Security filter:

After pretreatment, the high pressure pump is equipped with a security filter, which can prevent impurities larger than 1UM from entering the high pressure pump and damaging the high pressure pump and reverse osmosis membrane.The use of loose and tight PP filter (with skeleton, good strength), water from the outside to the inside of the filter, can extend the time of the filter element is blocked.The upper part has an exhaust valve, which can prevent the air from entering the pump and damaging the pump, and the lower part has a sewage valve, which can discharge the trapped impurities at any time.

4. Hollow ultrafiltration device:

Ultrafiltration technology is a relatively mature mineral water production process in the world at present, and is also widely used in the market and a wide range of water treatment technology.It can precisely filter out bacteria, viruses, and various floating substances in the water, with low working pressure, large water production, large water flow, low cost and easy maintenance.The design of automatic flushing device can prolong its service life.

Five.Features of the machine:

◇ UF film automatic and manual operation/washing;

◇ UF film in the machine can be manually chemical cleaning;

◇ High water level automatic shutdown, low water level automatic startup;

◇ Multi-stage high pressure pump water shortage protection and overload overload protection;

◇ Loss of voltage, undervoltage, overcurrent, short circuit, break circuit, leakage protection;

◇ The equipment is made of stainless steel, automatic operation, without manual ethics.

◇ Drinking natural mineral water, direct drinking water in the community, beverage, beer, brewing, dairy, natural spring water treatment, etc.

1. Inlet water quality is urban tap water or equivalent water source.

2. Technical indexes of water production:

(1) Water production flow: 20~30 tons /h (water temperature 25℃) pretreatment with UF hollow ultrafiltration device

(2) water production standard: in line with the national standard of natural mineral water A (GB/T 19249-2003)

(3) It conforms to the National Water Quality Standard for Drinking Mountain Springs CJ94-2005

(4) Conductivity ≥20μm/cm

1. The system equipment enjoys a one-year free quality warranty. The warranty date starts from the date of acceptance of the product, and the consumable filter material is not included.

2. In case of equipment quality problems occurring during the warranty period (except caused by misoperation or unforeseeable factors), the Supplier shall maintain the equipment free of charge and replace the damaged parts.

3. After the expiration of the warranty, only a certain amount of material fee and appropriate technical service fee will be charged.

4. In case of system failure that cannot be solved by itself or cannot be solved by phones, our technical maintenance personnel shall, within 24 hours after receiving the written notice of failure from the Demander, work out the solution (including temporary measures) and schedule and report to the leaders in charge of both parties.

5. After the delivery of the equipment, our engineers will pay a return visit to understand the operation of the equipment and provide technical services in time.We welcome users to ask any technical questions, we will promptly reply.

① The user should provide the detailed information of raw water test, so that our company can carry out the relevant selection and arrangement calculation.

② The user should explain the water quality requirements, use and quantity of water produced.

③ Our company has a variety of types of pressure vessels, membrane, accessories, etc., if the customer special instructions, we will try our best to meet the requirements.

④ Our company provides the installation and debugging of the designed and sold equipment and the training of the user's operation and operation personnel.

⑤ Our company implements the principle of one-year equipment warranty and lifetime service for users, and establishes files to track services to ensure quality level.

If the above equipment fails to meet your requirements, please contact us, we will work out a detailed project plan according to your actual situation, to achieve low cost, high efficiency, scientific process combination, so that the water production to meet your ideal requirements.