AG真人国际

1、Equipment name: automatic two-stage reverse osmosis with softening +EDI ultra-pure deionized water system + WFI equipment

2、Specifications and model: HDNRO+EDI-500L

3、Equipment brand: Wenzhou Haidoneng -WZHDN

Four.Product function description:

1, mechanical filter:

It is mainly used to remove impurities such as rust, sediment, algae and suspended matter in water, reduce the turbidity of water, so that the turbidity of effluent is less than 0.5NTU, CODMn is less than 1.5mg/L, iron content is less than 0.05mg/L, SDI≤5.Backwash and forward wash can be carried out at any time through the control valve to wash off the dirt on its surface, prevent its blockage and restore its filtering ability.

2, activated carbon filter:

Activated carbon has a strong adsorption filtration performance, the residual chlorine in the water, heterochromatic, odor, organic matter has a strong adsorption.Because the reverse osmosis membrane is very sensitive to residual chlorine and organic matter, it must be equipped with activated carbon to adsorb residual chlorine and organic matter, so that the residual chlorine in the effluent is less than or equal to 0.1mg/L and SDI is less than or equal to 4. First, it can meet the water supply requirements of the reverse osmosis membrane.The second can greatly improve the original taste of the source water.Can at any time through the multi-way control valve or steam butterfly valve backwash, in order to wash off the surface of the colloid and other pollutants, to prevent the surface of activated carbon is surrounded by impurities can not play adsorption, and to prevent its blocking, restore its processing ability.

3. Water softener:

The hardness of water is mainly composed of cations: calcium (Ca), magnesium (Mg) ions.When the raw water containing hardness passes through the positive resin layer of the water softener, the calcium and magnesium ions in the water are adsorbed by the resin, and the sodium ions are released at the same time.It from escaping from the exchange of water is to remove the demineralized water hardness ions, when the absorption of calcium and magnesium ions resin after reaching a certain degree, the loss of exchange capacity, water softener, in accordance with the scheduled program at this time, automatically invalidation of the resin regeneration work, with a high concentration of sodium chloride solution through resin, to restore failure of the resin to sodium to resin.

4. Security filter:

After pretreatment, the high pressure pump is equipped with a security filter, which can prevent impurities larger than 1UM from entering the high pressure pump and damaging the high pressure pump and reverse osmosis membrane.The use of loose and tight PP filter (with skeleton, good strength), water from the outside to the inside of the filter, can extend the time of the filter element is blocked.The upper part has an exhaust valve, which can prevent the air from entering the pump and damaging the pump, and the lower part has a sewage valve, which can discharge the trapped impurities at any time.

5. Two-stage reverse osmosis device:

Reverse osmosis technology is a relatively mature desalination technology in the world at present. It is also a kind of water treatment technology which is widely used in the market and widely applied in a wide range.It can precisely filter out bacteria, viruses, metal ions, salts, pesticides and various carcinogens in the water. It has the advantages of low working pressure, large water production, high desalination rate, easy maintenance and design of automatic washing device, which can prolong its service life.The design of automatic flushing device can prolong its service life.

6. Terminal filter:

The microporous filter membrane with absolute pore diameter of 0.22um can completely remove the microorganism and its heat source to ensure the asepsis of the water supply and meet the requirements of pharmaceutical water.

7. Ultra pure water equipment (electric desalination EDI device):

EDI electric desalination plant as equipment of producing ultrapure water, as a reverse osmosis device after secondary desalination equipment, can making out as much as 10-18.2 - M Ω / cm.Therefore, it is widely used in microelectronics industry, semiconductor industry, solar photovoltaic, fine chemical industry and power generation industry, pharmaceutical industry and laboratory.It can also be used as pharmaceutical distilled water, food and beverage production water, power plant boiler supply water, and other applications of ultra-pure water.

8, pH adjustment device:

Because the water produced by reverse osmosis is slightly acidic, the pH value after the secondary reverse osmosis is small, in order to meet the process requirements, and the membrane element requires neutral water intake, which is of great benefit to the long-term stable operation of the secondary reverse osmosis membrane, the desalination rate and the water yield.Therefore, it is necessary to add alkali to the water before the secondary reverse osmosis membrane to adjust the pH to neutral.Adopts German Aldaoxi or American Milton Luo metering pump automatic dosing, accurate measurement, dosing reliable.The dosage is about 2-5ppm.

9. Water for Injection System:

Water for injection (WFI) shall be prepared, stored and distributed to prevent microbial growth and contamination.Materials used in storage tanks and pipeline should be non-toxic and corrosion resistant.The design and installation of pipelines should avoid dead corners and blind pipes.Storage tanks and pipes should be cleaned and sterilized.A non - shedding hydrophobic sterilizing filter shall be installed at the vent of the WFI tank.Water for injection can be stored by above 80℃ insulation, above 70℃ insulation cycle or below 4℃ storage.

V. Features of the machine:

◇ Two-stage RO film automatic and manual operation/washing, optional touch screen control, man-machine interface;

◇ The two-stage RO film can be cleaned manually in the machine.

◇ Ultra pure water high water level automatic shutdown, low water level automatic startup;

◇ Multi-stage high pressure pump water shortage protection and overload overload protection;

◇ Loss of voltage, undervoltage, overcurrent, short circuit, break circuit, leakage protection;

◇ The equipment is made of stainless steel, automatic operation, without manual ethics.

Medicine, medical equipment, intravenous injection, biological agents, electronics, electroplating, electrophoresis, battery, vacuum coating, detergent, cosmetics, glue, chemical industry, pigment, surface treatment, brackish water treatment, etc.And can be applied as follows:

◇ The two-stage RO purification water device as the pre-stage desalination equipment of ultra-pure water production and EDI device become the optimal combination of ultra-pure deionized water equipment.

◇ Electronic industry water integrated circuits, silicon wafers, display tubes and other electronic components, PCB washing;

◇ Pharmaceutical industry water infusion, injection, tablet, biochemical products, equipment cleaning, etc.

◇ Ultrapure water for other process water, auto parts, home appliance coating, coated glass, cosmetics, fine chemicals, etc.

1. Inlet water quality is urban tap water or equivalent water source.Inlet water pressure: 0.15-0.4MPa, water temperature: 5-40℃

2. Technical index of water production: 0.5 ton /h (water temperature 25℃) two-stage reverse osmosis belt softening +EDI+ water for injection

(1) Water production standard: in line with the national standard A (GB/T 19249-2003) for reverse osmosis equipment,

(2) the ultrapure water: resistivity 10-18.25 - M Ω / cm or more, the water temperature is 25 ℃, the TOC: 1-3 PPB, particles (> 0.22 um) < 1 / ml, microbial < 1 cfu/ml.

1. The system equipment enjoys a one-year free quality warranty. The warranty date starts from the date of acceptance of the product, and the consumable filter material is not included.

2. In case of equipment quality problems occurring during the warranty period (except caused by misoperation or unforeseeable factors), the Supplier shall maintain the equipment free of charge and replace the damaged parts.

3. After the expiration of the warranty, only a certain amount of material fee and appropriate technical service fee will be charged.

4. In case of system failure that cannot be solved by itself or cannot be solved by phones, our technical maintenance personnel shall, within 24 hours after receiving the written notice of failure from the Demander, work out the solution (including temporary measures) and schedule and report to the leaders in charge of both parties.

5. After the delivery of the equipment, our engineers will pay a return visit to understand the operation of the equipment and provide technical services in time.We welcome users to ask any technical questions, we will promptly reply.

① The user should provide the detailed information of raw water test, so that our company can carry out the relevant selection and arrangement calculation.

② The user should explain the water quality requirements, use and quantity of water produced.

③ Our company has a variety of types of pressure vessels, membrane, accessories, etc., if the customer special instructions, we will try our best to meet the requirements.

④ Our company provides the installation and debugging of the designed and sold equipment and the training of the user's operation and operation personnel.

⑤ Our company implements the principle of one-year equipment warranty and lifetime service for users, and establishes files to track services to ensure quality level.

If the above equipment fails to meet your requirements, please contact us, we will work out a detailed project plan according to your actual situation, to achieve low cost, high efficiency, scientific process combination, so that the water production to meet your ideal requirements.