AG真人国际

1、 Equipment name: reverse osmosis flocculant

2、 Specification and model: hdn-x200

3、 Equipment brand: Wenzhou Haineng wzhdn

4、 Product Description:

Reverse osmosis flocculant is used in the pretreatment stage of reverse osmosis system, and it is used in the water with high SDI pollution index and turbidity. Colloid and suspended solids have strong penetration, which is easy to enter into the security filter through pretreatment, resulting in pollution blocking of filter element, and then it is easy to cause pollution of RO membrane if not found in time. Types of pollutants that can be removed by special flocculant for reverse osmosis membrane: cod, SS, colloid (including soluble matter), chroma, turbidity, oil, organic matter, metal oxide, bacterial microorganism, metal ion (iron, manganese, aluminum, chromium, nickel, lead, arsenic, cobalt, etc.)

5. Product features:
◇ The flocculation performance is excellent, the settling speed is higher than that of aluminum salt series flocculants, and the treatment cost is the lowest;

◇ adapt to a wide range of pH values in water, 4-12, and the best range of pH values is 6-10. 　

◇ it has good dewatering performance for sludge and wide range of temperature adaptation for source water. 　 　

◇ it has good removal effect for COD, BOD and chroma in various water sources.

◇ the formed alum flower is solid, with fast settling, which can reduce the phenomenon of running alum flower, and the number of filter backwashing is small. 　

Flocculant is a water-soluble inorganic electrolyte, the main effective component is high iron compound, which is a high-efficiency water purification agent of water treatment process, with significant its functions include precipitation of heavy metals and sulfides, decolorization, deodorization, oil removal, sterilization, phosphorus removal, COD and BOD reduction. Available in Dow membrane, reverse osmosis membrane, TFC membrane, nanofiltration membrane components.

7、 Working principle:

1. Flocculation and sedimentation method is to use inorganic flocculant (such as aluminum sulfate) and organic anionic flocculant polyacrylic ammonium (PAM) to prepare an aqueous solution to be added into the wastewater, which will produce a compressed double electric layer, making the suspended particles in the wastewater lose stability, and the particles will increase due to mutual coagulation, forming flocculent body and alum. When the flocs grow up to a certain volume, they will separate from the water phase sedimentation under the action of gravity, so as to remove a large number of suspended solids in the wastewater, so as to achieve the effect of water treatment. In order to improve the separation effect, coagulant aids can be added in proper time and amount. The treated sewage can basically meet the discharge standards in terms of chroma, chromium content and suspended matter content, and can be discharged or used as reinjection water for artificial water injection and oil recovery.

2. Flocculant is the most widely used agent in wastewater treatment, and flocculation process is an indispensable key link in wastewater treatment process. According to its chemical composition, it can be divided into inorganic salt flocculant, organic polymer flocculant and microbial flocculant. Users can make reasonable choice according to different nature of wastewater. The combination of flocculant and wastewater treatment equipment makes the wastewater treatment more effective and solves the wastewater treatment problems effectively.

3. The application of flocculant in wastewater treatment effectively improves the rate of wastewater treatment and makes the effect of wastewater treatment significant. At present, the agent is widely used in wastewater treatment of various industries to ensure that the water quality treated by large-scale wastewater treatment equipment can meet the national discharge standards, effectively prevent the deterioration of water pollution status, and ensure the sustainable development of ecological environment.

8、 Influencing factors:

There are many factors that affect the flocculation effect, such as the type, concentration, dosage of flocculant, the stirring state, pH value, temperature and its change, etc. different countermeasures should be adopted according to the specific situation.

1. Type and dosage of flocculant: different flocculants should be selected for different wastewater. The dosage of flocculant affects the flocculation effect to a great extent. Both excess and deficiency will lead to the dispersion and stability of sol particles. Therefore, the best dosage should be determined through experiments.

2. The influence of mixing and reaction time: after adding a certain flocculant to the wastewater, the flocculant should be diffused to the water quickly and evenly. After the flocculant is fully dissolved, the generated colloid will contact with the original colloid and suspended matter in the water and form many tiny alum flowers. This process is also called mixing. In the mixing process, the water flow is required to produce intense turbulence, and the agent and water are fully mixed in a relatively fast time. The mixing time generally requires a few seconds to two minutes.

3. The influence of pH value and alkalinity: pH value has a great influence on the operation of flocculant, so the effective range of pH value must be paid attention to when the wastewater is flocculated. The limit of pH value of organic polymer flocculant is not very strict, but the lower pH value has a great influence on the flocculation effect of flocculant. Inorganic flocculant is sensitive to the pH value of wastewater. As the hydrolysis reaction of flocculant constantly produces hydrogen ions, it is necessary to keep the hydrolysis reaction fully carried out.

4. Influence of temperature: water temperature also has influence on flocculation effect. The hydrolysis reaction of inorganic flocculant is endothermic reaction. When the water temperature is low, it is not conducive to the hydrolysis of flocculant, and the viscosity of water is also related to the water temperature. If the viscosity of water is high when the water temperature is low, the Brownian motion of water molecules will be weakened, which is not conducive to the destabilization and flocculation of the polluted substance colloid in water, so the formation of flocculant is not easy. Therefore, the amount of flocculant used in winter is more than in summer. Temperature rise is conducive to the collision between the colloids to produce agglomeration, but the temperature over 90 ℃ is easy to make the flocculant aging or decomposition to produce insoluble substances, but reduce the flocculation effect.

1. The system equipment is entitled to one-year free warranty, the warranty date is calculated from the date of product acceptance, and the consumable filter material is not listed here.
2. In case of any equipment quality problem (except caused by misoperation or unforeseen factors) during the warranty period, the supplier shall repair it free of charge and replace the damaged parts.
3. After the expiration of the warranty period, only a certain material fee and appropriate technical service fee will be charged.
4. In case of system operation failure which cannot be solved by itself or by telephones, our technical maintenance personnel shall make solutions (including temporary measures) and schedule within 24 hours after receiving the written notice from the demander and report to the competent leaders of both parties.
5. After the delivery of the equipment, our company will have engineers to pay a return visit to understand the operation of the equipment and provide technical services in a timely manner. Users are welcome to ask any technical questions, and we will reply in time.

① the user shall provide detailed data of raw water test, so that our company can carry out relevant selection and arrangement calculation.
② the user shall explain the water quality requirements, use and water yield of the produced water.
③ our company has many types of pressure vessels, membranes, accessories, etc. if the user gives special instructions, we will try our best to meet the requirements.
④ our company provides installation and debugging for the designed and sold equipment and training for the user's operation personnel.
⑤ our company implements the principle of one-year equipment warranty and lifelong service for users, and establishes archives for tracking service to ensure the quality level.

If the above equipment fails to meet your requirements, please contact us, and we will make a detailed engineering plan according to your actual situation, to achieve a low-cost, high efficiency and scientific process combination, so that the water production can meet your ideal requirements.